Selecting and Starting a Test
NetBlazer 81
Packet Sync Test Applications
4. Tap the Timer tab to automatically start and/or stop the test at a given
time or for a specific duration (refer to Timer on page 279).
5. For additional test configurations refer to Test Functions on page 455.
6. Tap the Start button from the right navigation bar to start the test (refer
to Start/Stop|TX Button on page 558). The Summary result page will
be automatically displayed when the test is started from any Setup
configuration page. For additional results refer to Test Results on
page 287.
7. Depending on the test, when the test ends automatically or manually
stopped, the generate report pop-up is displayed by default. If required,
tap Yes to generate a report of the test results and statistics (refer to
Report Button on page 547 for more information).
To Next Page
Loading...
