Safety Information
MaxTester Series 11
Laser Safety Information
Laser Safety Information
Units with Built-In VFL
Your instrument is a Class 2 laser product in compliance with standards
IEC 60825-1: 2007 and 21 CFR 1040.10, except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007. Laser radiation is emitted at the
output port.
The following label(s) indicate that the product contains a Class 2 source:
Note: The label is affixed to the back panel of the unit.
Laser information of the test instrument.
Always refer to the user guide of the
instrument for the exact information.
Units with test instrument
Laser information of the VFL
Units without test instrument
To Next Page
Loading...
