EXFO MaxTester series - Connecting to a Wireless Network

Managing Data
MaxTester Series 87
Transferring Data via Bluetooth
®
Transferring Data via Bluetooth
®
If your unit is equipped with the optional wireless module (internal), you
can transfer data between your unit and a computer using the Bluetooth
®
technology. By default, the Wi-Fi and Bluetooth
®
module is enabled, but
not connected to a network or a device.
If you have disabled the module, you must enable it before trying to
transfer data via Bluetooth
®
(see Enabling or Disabling the Wi-Fi and
Bluetooth® Module on page 103).
The computer that you use must run Windows, be equipped with a
Bluetooth
®
module (or adapter), and be configured properly.
Your unit must be located within a 9-meter area from your computer
(limitation of the Bluetooth
®
technology).
If you need to transfer large files (more than 100 MB), use a USB key, or
connect to a Wi-Fi or an Ethernet network.