EXFO MaxTester series - Page 98

Managing Data
88 MaxTester Series
Transferring Data via Bluetooth
®
Configuring the Computer
To communicate via Bluetooth
®
, your unit uses mobile device services,
which means that Mobile Device Center (Windows Vista, Windows 7, and
Windows 8), or ActiveSync (Windows XP) must be installed on your
computer.
You can download and install the required application from the Microsoft
Web site:
 ActiveSync for Windows XP:
http://www.microsoft.com/en-us/download/details.aspx?id=15
 Mobile Device Center for Windows Vista 32 bits, Windows 7 32 bits, or
Window 8 32 bits:
http://www.microsoft.com/en-us/download/details.aspx?id=14
 Mobile Device Center for Windows Vista 64 bits, Windows 7 64 bits,
Windows 8 64 bits:
http://www.microsoft.com/en-ca/download/details.aspx?id=3182
To configure the computer:
1. If necessary, download and install Mobile Device Center (or ActiveSync
for Windows XP) on your computer.
2. Configure the Bluetooth
®
settings as follows:
2a. On the computer, from the taskbar, click the Bluetooth
®
icon.
2b. Select Open Settings.
2c. Ensure that the option allowing Bluetooth
®
devices to find the
computer is selected.
2d. Click OK to confirm.