Extron electronics SSP 200 - Page 81

SSP 200 • SIS Configuration and Control 73
Command SIS Command
(Host to Device)
Response
(Device to Host)
Additional Description
Password and Security Settings
Set admin password
EX3!CA} Ipa•X3@]
Clear admin password
E•CA} Ipa•]
View admin password
ECA} X3@]
Set user password
EX3!CU} Ipu•X3@]
Clear user password
E•CU} Ipu•]
View user password
ECU} X3@]
Query session security
level
ECK}
Verbose modes 2/3
X3#]
PvlX3#]
KEY:
X3!
=
Password: Up to 128 characters. All man‑readable characters are permitted except “|”. Password cannot
be a single space. Passwords are case‑sensitive. The factory configured password for this device is set to the
device serial number. When performing a factory reset, the password is set to the default password, which is extron.
X3@
=
Responds with 4 asterisks (****) if password exists and empty if not, instead of actual password.
X3#
=
Connection security level: 11 = User 12 = Administrator
Directories
Change/create directory
Epath/directory/CJ} Dir•path/directory/]
Back to root directory
E/CJ} Dir•/]
Up one directory
E..CJ} Dir•path/directory/]
View current directory
ECJ} path/directory/]
File Commands
Erase user‑supplied web
page/file
ElenameEF} Del1lename]
Erase current directory
and contained files
E/EF} Ddl]
Erase current directory
and subdirectories
E//EF} Ddl]
List files from current
directory
EDF} lename•date/time•length]
Load file to user flash
memory
E+UFlesize,lename} Upl]
Retrieve file from user
flash memory
ElenameSF}
{responds with 4-bytes of le-size
+ raw unprocessed data in le}
Backup/Restore Box Configuration
Save box configuration
(to filesystem)
E1*{cong type}XF} Cfg1*{cong type}]
Restore box
configuration
E0*{cong type}XF} Cfg0*{cong type}]