Extron electronics SSP 200 - Page 85

SSP 200 • SIS Configuration and Control 77
Command SIS Command
(Host to Device)
Response
(Device to Host)
Additional Description
Volume
Specify volume
X6@V VolX6@]
Increment volume (+)
+V
VolX6@]
Decrement volume (–)
–V
VolX6@]
View volume setting
V
Verbose modes 2/3
X6@]
VolX6@]
KEY:
X6@
=
%: 0 to 100 (default 80)
Analog Input Level
Set analog input gain
level (input 5 only)
EAX6%SSP} SspAX6%]
View analog input gain
level (input 5 only)
EASSP}
Verbose modes 2/3
X6%]
SspAX6%]
View clip status
3S
Verbose modes 2/3
X11@]
Sts3*X11@]
KEY:
X6%
=
dB value: –18 to +24 (default 0)
X11@
=
Clip status: 0 = Off (no clipping) 1 = On (clipping)
Executive Modes
Set Executive Mode
X6&X ExeX6&]
View Executive Mode
X
Verbose modes 2/3
X6&]
ExeX6&]
KEY:
X6&
=
Executive mode number 0 = Unlock front panel (default) 1 = Lock front panel
2 = Limit front panel to volume control 3 = Limit front panel to input selection.
EDID Minder
Import EDID (.bin) to
input (store) slot
EIX7&,<lename>EDID} EdidIX7*]
Import EDID from
<lename> to input slot x77
Export EDID (.bin) to PC
EEX7&,<lename>EDID} EdidEX7*]
Export EDID from EDID table
slot x77 to <lename>
View EDID in HEX format
EREDID}
Verbose modes 2/3
X7*]
EdidRX7*]
EDID record: 128 or 256
Bytes (delivered as Hex)
View EDID native
resolution
ENEDID}
Verbose modes 2/3
X7(]
EdidNX7(]
View native resolution &
refresh rate of EDID from
EDID table slot 1. Example:
1920x1080 @60.00Hz
KEY:
X7&
= Slot number: 1 = HDMI input 2 = Loop Thru
X7*
=
128 or 256 byte EDID raw HEX (text form) from currently assigned EDID
X7(
=
Native resolution and refresh rate from currently assigned EDID, for example: 1920x1080 @60 Hz.
EXP Port
Get current device
connection status
EREXPP}
Verbose modes 2/3
X8!]
ExppRX8!]
KEY:
X8!
=
Connection status: 0 = Not connected 1 = Connected