Extron electronics SSP 200 - Page 86

SSP 200 • SIS Configuration and Control 78
Command SIS Command
(Host to Device)
Response
(Device to Host)
Additional Description
Layouts and Speakers
Set lip‑sync offset
EYX4@*X8(SSP} SspYX4@*X8(]
View lip‑sync offset
EYX4@SSP}
Verbose modes 2/3
X8(]
SspYX4@*X8(]
Set mono output mode
EMX9)SSP} SspMX9)]
View mono output mode
EMSSP}
Verbose modes 2/3
X9)]
SspMX9)]
KEY:
X4@
=
Input number: 1 to 5
X8(
=
Offset: 0 to 3000, 10x time value, from 0.0 to 300.0 milliseconds
X9)
= Mono output mode: 1 = Center channel only (default) 2 = Front left and right only
Subwoofer
Set subwoofer mode
EJX9#SSP} SspJX9#]
View subwoofer mode
EJSSP}
Verbose modes 2/3
X9#]
SspJX9#]
KEY:
X9#
=
Subwoofer mode: 0 = Off 1 = LFE (SUB) (default).
Surround
View listening mode
ELX4@*X4%SSP}
Verbose modes 2/3
X9*]
SspLX4@*X4%*X9*]
KEY:
X4@
=
Input number: 1 to 5
X4%
=
Source format: 0 = Not present 1 = Analog 2 = PCM 3 = Dolby Digital 4 = Dolby Digital Plus
5 = Dolby Digital Plus ATMOS 6 = Dolby TrueHD 7 = Dolby TrueHD ATMOS 8 = DTS or DTS 96/24
9 = DTS‑ES (96/24, Matrix, or Discrete) 10 = DTS‑HD High Resolution Audio 11 = DTS‑HD Master Audio
12 = DTS Express 13 = DTS:X
X9*
= Listening mode: 1 = Auto (follow source) 2 = Stereo 3 = Mono 4 = Stereo to all 5 = Mono to all
6 = Dolby Surround (Upmixer) 7 = DTS Neural: X (Upmixer)
Resets
System reset (factory
default)
EZXXX} Zpx]
Absolute reset including
IP settings
EZQQQ} Zpq]