FAAC A100 Compact - 2 B PREPARING THE LEAVES; 3 B INSTALLING THE LOWER SLIDING BLOCKS; 4 B ADJUSTING THE LEAVES; 5 B ADJUSTING THE MECHANICAL STOPS

21
A
B
ENGLISH
Transit space
Transit space
Transit space
LH opening single leaf
RH opening single leaf
Double leaf automated systems:
Install two belt fittings on the more internal carriages and brushes
as shown in Fig. 34 ref. A.
Single leaf automated systems:
Fit the belt fitting and the brushes as indicated in fig. 34 ref. B
6B INSTALLING THE BELT FITTINGS AND BRUSHES
2B PREPARING THE LEAVES
Refer to chapter 2A of the assembled automated system
installation.
3B INSTALLING THE LOWER SLIDING BLOCKS
Refer to chapter 3A of the assembled automated system
installation.
4B ADJUSTING THE LEAVES
Refer to chapter 4A of the assembled automated system
installation.
5B ADJUSTING THE MECHANICAL STOPS
Refer to chapter 5A and 6A of the assembled automated system
installation.
brush
brush
brushes
fig. 34