FAAC A100 Compact - E100 - E140 CONTROL BOARD; CONNECTOR J7; CONNECTOR J4

25
1 2 3 4 5 6 7 8 9 10 11 12 13
F
MOTORENCODER
J20A
ON
43
12
J1
J16
J13
J8
DL8
J6 J4 J5
DL9
DL10
RL1
J17
J20
IC1
SW2
SW4
SW3
SW1
DS1
J7
DL3 DL7
DL1 DL2
DL4
DL5
DL6
J10
J19
BATTERY
POWER
24V
POWER
SUPPLY
USB
2EASY
KEEPER
PHOTOCELLS
LOCK
ACCESSORIES
OPTIONS
LCD MODULE
J20B
ETH MODULE
RADIO MODULE
ENGLISH
E100 - E140 CONTROL BOARD
LED ON OFF
DL1 (I-DET) input I-DET closed input I-DET open DL2 (E-DET) input E-DET closed input E-DET open DL3 (KEY) input KEY closed input Key open DL4 (EM1) input EMERG.1 closed input EMERG.1 open DL5 (EM2) input EMERG.2 closed input EMERG.2 open DL6 (P1) input P 1 closed input P 1 open DL7 (P2) input P 2 closed input P 2 open DL8 (ERROR) see table below POWER Mains power supply ON Mains power supply OFF 24V= + 24V= present + 24V= absent
LED ERROR STATUS MEANING OFF normal operating condition ON microprcessor E140 control board broken FLASHING power-on
PUSH-BUTTON
MEANING
SW1 executes automatic SETUP / RESET SW2 “F” programming push-button SW3 “+” Programming push-button SW4 “-” Programming push-buttons
DS1 ON OFF
Dip n°1 Pair of button photocells No. 1 present Pair of button photocells No. 1 absent Dip n°2 Pair of button photocells No. 2 present Pair of button photocells No. 2 absent Dip n°3
EMERG2 activates NIGHT function EMERG2 standard function
Dip n°4 motor rotation direction (see table)
CONNECTOR MEANING J1 Main power supply 36V 4A J4 Button photocells XF A J5
Motor lock
J6 SD-Keeper - SDK Light J7 Inputs and power supply for accessories J8 USB port for connection to PC J10 BUS - 2 EASY (for future use) J13 Motor J16 Emergency battery J17 Motor encoder J18-J19 LCD Display J20-J20A-J20B
Optional modules:
Optional modules:
- radio module (for E100 e E140)
- radio module (for E100 e E140)
- Eth module
- Eth module
(only for E140)
(only for E140)