FARGO electronics HDPii - Page 371

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
17-3
ID (Identification), 16-9
ID format, 7-31
ID software applications, 7-77
IEEE 1284 (Institute of Electrical and Electronics
Engineers 1284), 16-10
Image, 16-10
Image color tab, 7-43
Image orientation, 7-53
Image Position controls, 7-53
Image Transfer tab, 7-15
Inhibit panel, 2-20
Input, 16-10
Input Hopper, 16-10
Input Hopper Card Capacity, 2-11
Interface, 2-11
Intermediate Transfer Media (InTM), 16-10
IPC, 7-7
ISO, 16-10
ISO 7811-2 Magnetic Stripe, 7-76
ISO encoded data format, 7-68
ISO Track Locations, 7-76
J
JIS C 6220 Type II cards, 7-61
JIS II (Japanese Industrial Standard), 16-10
K
K Panel, 16-10
K Panel Resin options, 7-90
K Panel Resin tab, 7-84, 7-85
L
Lamination, 16-10
LAN (Local Area Network), 16-11
Landscape, 16-11
LCD (Liquid Crystal Display), 16-11
LCD and Softkey Control Pad, 2-18, 2-19
LCD Display, 2-17, 2-18
LED (Light Emitting Diode), 16-11
less heat, 7-42
less saturated resin images, 7-42
LoCo (Low Coercivity), 16-11
Low Coercivity, 7-65
lower transfer temperature, 7-2
LPT Port (Line Printer Port), 16-11
M
Mag encoding, 16-11
Mag stripe, 16-11
Mag Track, 16-11
Mag Verify, 16-11
Magnetic Encoding tab, 7-60
Magnetic Stripe Encoding Modules, 7-60
Magnetic Stripe encoding process, 7-60
Magnetic Track data, 7-77
Magnetic Track Options, 7-67
Magnetic Track Selection, 7-65
matte-finished cards, 7-2
Maximum Accepted Card Length Range, 2-11
Maximum Accepted Card Width Range, 2-11
maximum value, 7-54
MB (Megabyte), 16-12
Measuring area positioned on card, 7-89
Media, 16-11
Medium Coercivity, 7-65
Memory, 16-12
Menu, 16-12
Monochrome, 16-12
more heat, 7-42
N
Network, 16-12
New Temperature Setting, 2-24
No MiFare Encoder, 5-14
No Prox Encoder, 5-14
O
Oersted (Oe), 16-12
Offset, 16-12
Operating Temperature, 2-12
O-Ring, 16-12
OS (Operating System), 16-12
Output, 16-12
Output hopper, 16-12
Output Hopper Card Capacity, 2-12
Output Module Field upgrade, 3-5
Overlaminate, 16-13
Overlay, 16-12
Oversized Cards, 16-13
P
Packing the Printer, 12-1
Parallel, 16-13
Parallel Interface Port, 2-17
Parallel Port, 16-13
Pass Count, 5-36
Pause button, 2-19
PC (Personal Computer), 16-13
PCB (Printed Circuit Board), 16-13
Peel, 16-13
Peel-Off, 16-13
Peripheral, 16-13
PET, 16-14
Photo, 7-44
Pinch Roller, 16-14
Pixel, 16-14
Platen, 16-14
Platen Rollers, 10-32
PolyGuard Overlaminate, 16-14
Port, 16-14
Portrait, 16-14
Portrait/Landscape, 7-17
positive
/negative image placement values, 7-54
Potentiometer, 16-14
Power Port, 2-17
Print All Black With K Panel, 7-84