FARGO electronics HDPii - Page 372

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
17-4
Print Area, 2-13
Print Back Side First option, 7-33
Print back side only, 7-34
print both sides, 7-31, 7-32
Print Both Sides option, 7-32, 7-34
Print Driver, 16-14
Print Job, 16-14
Print Length, 2-8, 7-12
Print Ribbon, 10-35
Print Ribbon Options, 2-13
Print Ribbons, 2-20
Print Server, 16-14
Print Speed, 2-14
Print Speed-Batch Mode, 2-14
Print Station, 10-36
Print Status Screen, 2-19
Print Test Image, 5-32
print the first page of a two-page document, 7-33
Print Width, 2-8, 7-12
Print YMC Under K and Print K Only options, 7-90
Print YMC Under K/Print K Only options, 7-90
Print/Transfer Stations, 10-32
printed image, 7-54
printed text and barcodes, 7-90
Printer, 2-19
Printer Cleaning Kit, 10-32, 10-36
Printer Components, 2-17
Printer Driver setup, 7-55
Printhead, 2-17, 16-15
Printhead cleaning, 10-36
Printhead Cleaning Pen, 10-36
Printing Method, 2-13
Proper Settings, 7-3
Proximity cards,
2-21
PVC, 16-15
Q
Queue, 16-15
R
RAM (Random Access Memory), 16-15
Rasterize, 16-15
Reboot, 16-15
recorded magnetic data, 7-66
Registration, 16-15
Regulatory Compliances, 2-5
Replacing the Card Cleaning Tape, 10-37
Resin, 16-15
resin black (K) Panel, 7-85, 7-86, 7-87
Resin Black panel, 2-20
resin dither, 7-44
Resin Heat slide, 7-42
resin images, 7-42
Resin Thermal Transfer, 2-17
Resolution, 16-16
RFI (Radio Frequency Interference), 16-16
RFID (Radio Frequency Identification), 16-16
RGB, 5-37
RGB (Red/Green/Blue), 16-16
Ribbon, 16-16
Ribbon / Cards, 1-2
Ribbon cable, 16-16
Ribbon Panels, 7-32
Ribbon type, 7-24, 7-25, 7-26, 7-27, 7-29
Ribbon/Cards, 7-1, 10-30
Right Cards, 7-2
Right Cards/Print Process, 7-2
RMA number, 16-16
Roller, 16-16
rotate front by 180 Degrees, 7-36
rotates image, 7-36
RS-232, 16-16
S
safety issues, 1-2, 2-1, 3-1, 4-1, 5-2, 7-1, 10-30
Safety Standards, 2-5
Saturation, 16-17
Scroll controls – K Panel, 7-82
second K Panel, 7-32
Self-test, 16-17
Sensor, 16-17
Serial interface, 16-17
Shift Data Left option, 7-66
SIMM, 16-17
Simplex, 16-17
Smart Card, 16-17
smart chip, 7-2
Softkey Buttons, 2-17, 2-18
Software, 16-17
Software Drivers, 2-14
Software Drivers, 2-11
special precautions, 1-2, 7-1, 10-30
Split 1 Ribbon Panels, 7-32
Spooler, 16-17
Spooling, 16-18
SS (Start Sentinel), 16-18
SS, ES, FS, 7-77
Stacker, 16-18
Start Sentinel (SS), 7-77
Stepper Motor, 16-18
String, 16-18
Super Coercivity, 7-65
Supply Frequency, 2-15
Supply Voltage, 2-15
Surface mount, 16-18
surface roughness, 7-2
Switch Box, 16-18
System Color Management, 7-40
System Requirements, 2-15
T
TAC, 16-18
Tape adhesion Test, 7-5, 7-7
Tape Test, 7-58
Technical Specifications, 2-7, 2-8, 2-9, 2-10, 2-11, 2-12,
2-13, 2-14, 2-15
Temp file, 16-18
Temperature Adjustment, 2-24
Test Print, 16-18
Thermistor, 16-18