FDE SO-CONNECT PID - Page 34

Partie III – Pump programming
34
Step 3 : entering the flow rate or the duration of the infusion
SO
♥
CONNECT PID pump displays the screen of the flow rate and the duration of the infusion. Press
on the flow rate to modify it.
Entering the flow rate.
SO
♥
CONNECT PID pump displays the screen of the flow rate and the duration. Press the flow rate
to modify it.
SO
♥
CONNECT PID pump displays the screen to enter the flow rate.
▪ Press the graph to select the infusion rate.
▪ Adjust the value with “+” and “-“.
▪ Press “ ” to cancel and return to the previous screen.
▪ Press “ ” to confirm and return to the previous screen.
Entering the duration of the infusion
The SO
♥
CONNECT PID pump displays the screen of the flow rate and duration. Press the duration
to modify it.
The SO
♥
CONNECT PID pump displays the screen to enter the duration of the infusion.
▪ Press the graph to select the duration.
▪ Adjust the value with “+” and “-“.
▪ Press “ ” to cancel and return to the previous screen.
▪ Press “ ” to confirm and return to the previous screen.