Ferroli TOR - User Manual

Questions and Answers

D
Derrick CraneAug 12, 2025
What to do if there is water pressure switch fault in Ferroli TOR Boiler?
- E
  elizabeth98Aug 12, 2025
  If the water pressure switch in your Ferroli Boiler malfunctions, it could be due to a few reasons. First, there might be water leakage in the heating circuit, in which case you should restore the water. Another cause could be disconnection or damage to the water pressure switch/sensor, so you should check the water pressure switch. Finally, the pressure sensor type might differ from the parameter P03 selection; in this case, check and modify the parameter P03.
K
Katherine PetersAug 15, 2025
Why does the safety thermostat intervene (95 °C) in my Ferroli Boiler?
- R
  Raymond MillerAug 15, 2025
  If the safety thermostat intervenes (95 °C) in your Ferroli Boiler, it could be due to a damaged heating thermostat. Check whether the heating thermostat positioning and operation are correct. Another possible cause is that the water in the heating system isn’t circulating. In this case, check the circulating pump and remove the air from the heating system.
S
stevebuckAug 20, 2025
How to fix heating temperature sensor fault in Ferroli TOR Boiler?
- T
  Tara ConnerAug 20, 2025
  If you're experiencing a heating temperature sensor fault with your Ferroli Boiler, it could be due to an open circuit, a short circuit, or a loose connecting line. To resolve this, check the connection or replace the temperature sensor.
R
Ryan WardAug 23, 2025
What to do if the heater temperature exceeds 90°C in Ferroli TOR?
- M
  Maria Williams DVMAug 23, 2025
  If the heater temperature exceeds 90 °C in your Ferroli Boiler, it might be because the water in the heating system isn’t circulating properly. To fix this, check the circulating pump and remove any air from the heating system.
B
brent52Aug 27, 2025
Why is there too big temperature gradient in Ferroli Boiler?
- L
  lmorganAug 27, 2025
  A large temperature gradient in your Ferroli Boiler can be caused by a couple of things. It might be due to water leakage in the heating circuit, so you should inject water into the system. Alternatively, the pump could be blocked, so check the circulation of the pump.
B
Brandon LopezAug 31, 2025
How to troubleshoot outdoor temperature sensor fault in Ferroli TOR Boiler?
- T
  Thomas HartmanAug 31, 2025
  If you encounter an outdoor temperature sensor fault in your Ferroli Boiler, it could stem from an open circuit, a short circuit, or a loose connecting line. Inspect the connection or replace the temperature sensor to resolve this issue.
L
lopezpatriciaSep 3, 2025
What causes water tank temperature sensor fault in Ferroli TOR?
- M
  Michael WhiteSep 3, 2025
  If you have a water tank temperature sensor fault with your Ferroli Boiler, the issue might be an open circuit, a short circuit, or a loose connection to the water tank NTC. Check the connection or replace the temperature sensor.
H
Hannah WhiteSep 7, 2025
What to do if Ferroli Boiler doesn't detect temperature sensor?
- J
  Jason HallSep 8, 2025
  If your Ferroli Boiler isn't detecting the temperature sensor, it's possible that the heating temperature sensor has fallen off or is damaged. Check whether the heating temperature sensor has fallen off, and if so, reposition it, or replace it if damaged.