4-14 FT-100/CI and FT-170/CI Operation Guide
Document 40275-0913
Side/Unslit Flap Failure
This is a high priority message. The trigger beam is blocked or the
sensor failed. Check the trigger sensor for any blockage. Call your
service department if this message persists.
Trailing Flap Failure
This is a high priority message. he trigger beam is blocked or the
sensor failed. Check the trigger sensor for any blockage. Call your
service department if this message persists.
Trigger Signal Failure
This is a high priority message. The trigger beam is blocked or the
sensor failed. Check the trigger sensor for any blockage. Call your
service department if this message persists.
To Next Page
Loading...
