Fimap MXR - Page 77

• Accompanying the supply cable of
the blinker so that it is placed lat-
erally to the suction hose.
• Accompany the supply cable of the
blinker inside the battery compart-
ment through the slot on the rear of
the solution tank. The entry point is
the same for which the suction hose
passes.
11.2.2-146 11.2.2-147
11.2.2-148 11.2.2-149
• Connect the power cable connector
of the blinker to the of the connector
of the wiring inside the battery com-
partment.
• Tighten the brush rear support.
• Reconnect the battery cables and
proceed to a functional check of the
machine.
11.2.2-150 11.2.2-151
11.2.2-152
77