Figure 4.
KEYPAD DESCRIPTION
STANDBY
PROGRAM SETUP >
The NEXT key is used to scroll down through the various menus.
It is used to increment in the modify mode. The BACK key is
used to scroll up through the menus. It is also used to decrement
the value when in the modify mode. Use the MODE key to enter
a sub-menu when the displayed item indicates a sub-menu with a
right facing arrow > and exit the sub-menu and move on to the
next main menu item. Use the RESET/MDFY key to reset the
BurnerLogix from a lockout condition, force a recycle of the
programmer, indicate to the system the value displayed is to be
modified or when done with the modification.
Figure 5. BURNERLOGIX MENU STRUCTURE
To Next Page
Loading...
Need help?
General
