First Alert FA162C Installation Instructions

–50–
DIALER
PROGRAMMING
(
✱
40Ð
✱
50)
✱
40 PABX ACCESS CODE (See Box at Left) ÊÊÊÊ|ÊÊÊ|ÊÊÊÊ|ÊÊÊÊ|ÊÊÊ|ÊÊÊÊ
Enter up to 6 digits if PABX is needed to access an outside line. If
fewer than 6 digits are needed to be entered, exit by pressing [
✱
] and
next field number (e.g., 41). To clear entries from field, press
✱
40
✱
.
Fields
✱
40,
✱
41,
✱
42:
Enter up to the number
of digits shown. Do not
fill unused spaces.
Enter 0Ð9,
# + 11 for Ô
✱
Õ
# + 12 for Ô#Õ
# + 13 for a pause
(2 seconds)
✱
41 PRIMARY PHONE No. (See Box at Left)
ÊÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ Ê
Enter up to 16 digits. If fewer than 16 digits entered, exit by pressing
[
✱
] and next field number (e.g., 42). To clear entries from field, press
✱
41
✱
.
Note: ÊBack-up reporting (8 calls are made to the secondary phone
number if no kiss-off is received after 8 attempts to the primary
number) is automatic only if there is a secondary phone number (field
✱
42).
✱
42 SECONDARY PHONE No. (See Box at Left)
ÊÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ|ÊÊÊ Ê
Enter up to 16 digits. If fewer than 16 digits entered, exit by pressing
[
✱
] and next field number (e.g., 43). To clear entries from field, press
✱
42
✱
. See back-up reporting note for field *41. If using the pager
feature, enter the pager phone number here.
For Fields
✱
43,
✱
44,
✱
45,
and
✱
46:
Enter digits 0Ð9; # +11=B; #
+12=C; # +13=D; # +14=E; or
# +15=F.
Enter [
✱
] as the fourth digit if
a 3-digit account number (for
3+1 dialer reporting format)
is used. Enter 0 as the first
digit of a 4-digit account
number for Nos. 0000Ð0999.
Exit field by pressing [
✱
] (and
press next field number) if
only 3 digits are used.
To clear entries from field,
press
✱
43
✱, ✱
44
✱
,
✱
45
✱
or
✱
46
✱
.
See blank Programming Form
for examples of Account No.
entries.
If using the paging feature, do
not enter a leading 0 in the
subscriber account number,
and do not use digits A-F
anywhere in the number.
Some paging systems provide
voice mail capability, which is
activated by a leading 0 in the
message.
✱
43 PRIMARY SUBS ACCOUNT. No. (partition 1) ÊÊÊÊ|ÊÊÊ|ÊÊÊÊ|ÊÊÊÊ
See box at left.
✱
44 SECONDARY SUBS ACCOUNT. No. (partition 1) Ê ÊÊÊÊ|ÊÊÊ|ÊÊÊÊ|ÊÊÊÊ
See box at left.
✱
45 PRIMARY SUBS ACCOUNT. No. (partition 2) ÊÊÊÊ|ÊÊÊ|ÊÊÊÊ|ÊÊÊÊ
See box at left.
✱
46 SECONDARY SUBS ACCOUNT. No. (part. 2) Ê ÊÊÊÊ|ÊÊÊ|ÊÊÊÊ|ÊÊÊÊ
See box at left.
✱
47 PHONE SYSTEM SELECT ÊÊ1ÊÊ
If Central Station Receiver is not on WATS line:
0 = Pulse Dial
1 = Tone Dial
If Central Station Receiver is on WATS line:
2 = Pulse Dial
3 = Tone Dial
✱
48 REPORT FORMAT Ê ÊÊ7Ê Ê ÊÊ0ÊÊ
0 = 3+1; 4+1 ADEMCO Low Speed Standard Prim. Sec.
1 = 3+1; 4+1 Radionics Standard
2 = 4+2 ADEMCO Low Speed Standard
3 = 4+2 Radionics Standard
6 = 4+2 ADEMCO Express
7 = ADEMCO Contact ID Reporting
8 = 3+1; 4+1 ADEMCO Low Speed Expanded
9 = 3+1; 4+1 Radionics Expanded
Enter
✱
as the 4th digit of
✱
43 through
✱
46, if 3+1 dialer reporting is
to be used.
For an explanation of these formats, see the SYSTEM
COMMUNICATION section.
Note: The maximum number of alarm and alarm restore reports
during one armed period is determined by field
✱
93.

First Alert FA162C Specifications

General

Brand	First Alert
Model	FA162C
Category	Security System
Language	English