13
DMP10 / DMP20 Description
• Shortened course
Activates a semi-automatic calibration routine
• Reset
Deletes all coating thickness correction values from the selected calibration
• Delete
Deletes the selected calibration from the probe memory
• Info
Displays information about the selected calibration
Gauge Settings menu
Gauge Settings > Language
Selects the display language
Gauge Settings > Display Settings
Activates/deactivates display flip function and display brightness
Gauge Settings > Signal Settings
• Audible signal on/off
• Activates/deactivates the visual signals and sets the luminosity
Gauge Settings > Energy Savings
Activates automatic gauge shutdown and display dimming after a preset period
of time
Gauge Settings > Date & Time
Sets the date and time, and also the date and time format
Gauge Settings > More Settings
• Define Lock Code/Delete Lock Code
Activates/deactivates the lock code for locking the calibration
Gauge Settings > Probe - Menu
• Probe Raw Values
Test menu with display of probe raw data
• Set Power Line Frequency (not for gauge models ISOSCOPE®)
Adjusting the frequency of the local voltage supply to compensate for the
interference radiation emanating from the local voltage supply increases
the measuring performance for the DUALSCOPE® and DELTASCOPE® gauge
models
To Next Page
Loading...
