Need help?Do you have a question about the flamco LogoMatic G2 and is the answer not in the manual?
General| Brand | flamco |
|---|---|
| Model | LogoMatic G2 |
| Category | Industrial Equipment |
| Language | English |
Guidelines for safe operation, accessibility of instructions, and identification of authorized personnel.
Lists statutory accident prevention, environmental protection, and specific industry standards like DIN, EN, VDE.
Defines the station's purpose for heat transfer and prohibits any unintended use causing hazards.
Details permissible pressure ratings, operating temperatures, and pressures for heating and sanitary systems.
Warns against modifying the device and lists specific disallowed actions like using wrong liquids or operating without instructions.
States the product name, function, type, and manufacturer of the LogoMatic G2 unit.
Highlights risks of scalding from hot water and electrical shock, emphasizing qualified personnel and precautions.
Procedures for handling breakdowns/leaks and guidelines for using specified spare and wear parts.
Defines the technical training, experience, and skills required for personnel performing work on the system.
Explains the station's function in heating and domestic hot water preparation using a plate heat exchanger and continuous flow.
Explains the structure of article numbers based on heating type, performance class, and domestic water circulation variants.
Covers physical dimensions, heating/hot water outputs, and application limits for temperature and pressure.
Lists and describes the function of various numbered components within the LogoMatic G2 station, shown in diagrams.
Provides dimensional drawings for base plates for insulated and steel variants for surface-mounted installations.
Details dimensions for the SM thermal insulation and retaining plate for surface-mounted variants.
Outlines the sequence for attaching the retaining plate, hanging the station, and making hydraulic/electrical connections.
Provides a step-by-step guide for installing an optional heat meter into the station, including safety warnings.
Details the procedure for installing an optional cold water meter on the station, including safety warnings.
Explains how to set the zone valve for the heating circuit, including presetting options and reference diagrams.
Provides technical data and installation steps for the optional Safety Temperature Limiter (STL) and its actuator.
Describes the function of the dirt trap and thermostatic circulation bridge, including adjustment ranges and flushing procedures.
Explains how to adjust the differential pressure regulator and provides valve settings based on rotations and pressure.
Details the function of control valves X and Y in managing domestic water heating priority and secondary heating circuit supply.
Describes the configuration for MC variants, focusing on the mixing circuit as an injection system with HE pump and zone valve.
Provides technical data, electrical specifications, and performance characteristics for the GF UPM3 Hybrid pump.
Explains the hot water throttle on S- and M-Lines and the color coding of available throttle plates.
Details the domestic water circulation system, including the pump, backflow preventer, and operational requirements.
Illustrates heating circuit manifolds and lists other optional accessories like hoods and thermal insulation.
Provides details on underfloor heating manifolds and prewired UFH terminal strips, including article numbers.
Shows sample depictions of extending static heating circuits with MC-UC variants and relevant extension article numbers.
Details DN 20 straight ball valve sets (BV), including article numbers and installation notes.
Describes two variants of mounting rails with ball valves (FFR) and their respective article numbers for installation.
Provides an overview of SM hoods, their dimensions, notes, and article numbers for various configurations.
Details installation dimensions for FM hoods, including panel dimensions, height adjustability, and article numbers.
Presents sample configurations for LM G2 SI/SM variants, showing article numbers for different PHE types and components.
Provides instructions for flushing, filling, and bleeding the system prior to commissioning, with notes for installers.
Details the initial start-up process, controller connection, and observation of settings for optimal operation.
Discusses domestic water hardness impact on scaling and provides guidelines for preventing limescale deposits and corrosion.
Presents pressure loss curves for the hot water section based on domestic water draw-off rate for S-, M-, and L-Lines.
Provides a systematic overview of checks to help locate and diagnose common faults within the system.
Lists spare parts for valves, flow meters, and sensor packages with corresponding article numbers.
Lists spare parts for pumps, STM, DPCV, and seal packages with corresponding article numbers.
To Next Page
