Flexim FLUXUS G809 - Page 45

6 Installation
FLUXUS G809 6.2 Transducers
45
UMFLUXUS_G809V2-2EN, 2020-06-25
• Select the installation instructions according to the supplied clasp:
Band clamp clasp
• Insert the tension strap into the tension strap clamp (2), see Fig. 6.27.
• Place the tension strap around the pipe and insert it into the clasp, see Fig. 6.28.
• Tighten the tension strap.
• Tighten the clasp screw.
• Tighten the nut of the tension strap clamp (2), but not too firmly in order not to damage the tension strap, see Fig. 6.27.
Quick release clasp
• Insert the tension strap into the tension strap clamp (2) and the metal spring, see Fig. 6.29 and Fig. 6.27.
• Place the tension strap around the pipe and insert it into the clasp.
• Position the metal spring opposite to the tension strap clamp (2).
• Tighten the tension strap.
• Tighten the clasp screw.
• Tighten the nut of the tension strap clamp (2), but not too firmly in order not to damage the tension strap, see Fig. 6.27.
Fig. 6.26: Rail, mounted on one side of the pipe
1 – tension strap clamp
2 – tension strap clamp
3 – nut
Fig. 6.27: Rail on the pipe
1 – tension strap clamp
2 – tension strap clamp
3 – metal spring
4 – nut
5 – clasp
2
1
3
1
3
4
2
5
1