6 Installation
FLUXUS G809 6.2 Transducers
53
UMFLUXUS_G809V2-2EN, 2020-06-25
• Put the rail on the tension strap clamps, see Fig. 6.48.
• Fix the rail to the tension strap clamps with the screws.
• Tighten the screws.
Notice!
In order to release the screw and the tension strap, press the lever down, see Fig. 6.47.
Fig. 6.46: Ratchet clasp with tension strap, tension strap clamp and metal spring on the pipe
1 – metal spring
2 – ratchet clasp
3 – tension strap clamp
Fig. 6.47: Ratchet clasp with tension strap
1 – sense of rotation
2 – edge
3 – lever
4 – clasp screw with slot
Fig. 6.48: Rail on the pipe
1 – screws
2
1
3
1
2
4
3
4
1
To Next Page
Loading...
