Flexim FLUXUS H721 - Page 215

Annex
FLUXUS H721 A Menu structure
215
UMFLUXUS_H721V1-5EN, 2022-05-15
Event-based storing of measured values
Trigger
Special functions Options
Inputs Channel x
Condition
Event trigger
Temperature Current Voltage Binary
Enable Enable Enable Enable Select Rx
Pt100/Pt1000 Source item Source item Negate input Enable Rx
→ Yes
→ No
Source item
Condition
Trigger value
Function
Yes
→ MAX (x>limit)
→ MIN (x<limit)
→ Within range
→ Out of range
→ ERR (x=fail)
→ Out of range
→ ERR (x=fail)
→ MAX (x>limit)
→ MIN (x<limit)
→ ERR (x=fail)
Type
Range center Trigger value
Range width Hysteresis Non-hold Hold for a while Hold
Hold interval
Glitch interval
[1]
Input info
→ Within range
→ Out of range
→ MAX
→ MIN
→ ERR
Test signal
Range center Trigger value
Range width Hysteresis
Glitch interval
Failure delay
Action
Special functions
Data logger
Configuration Storage rate (trig.)
Logger channels Buffer time →П
Start storing Buffer time П→
Event-based Storage rate FastF
With input Ringbuffer
Storage rate w/o trig. Storage mode
Legend
[1] depending on the selected function
1
2