6 Mounting
6.2 Transducers FLUXUS H721
2022-05-15, UMFLUXUS_H721V1-5EN
48
Step 2: Fixation of the clasps to the tension straps
• Select the installation instruction of the supplied clasp:
Band clamp clasp
The clasp is fixed to the tension strap (see Fig. 6.38).
Quick release clasp
The clasp is fixed to the tension strap (see Fig. 6.39).
• Cut the tension strap to length (pipe circumference + at least 120 mm).
Fig. 6.37: Disassembly of the transducer mounting fixture Variofix C
1–cover
2 – tensioning screw
3 – spring clip
4 – indentation
5 – spacing element
6–rail
7 – tension strap clamp
Fig. 6.38: Band clamp clasp with tension strap Fig. 6.39: Quick release clasp with tension
strap
To Next Page
Loading...
