FLIR RAYMARINE E125 - Vector Options; Tracked Target List

12.6 Vector options
The Vector options can be accessed from the
Collision Avoidance menu.
The location of the Vector options is dependent on
the application and the overlays you have enabled:
• Radar application: Menu > Collision Avoidance.
• Chart application with Radar and AIS overlays
enabled: Menu > Radar & AIS > Collision
Avoidance
• Chart application with only the Radar overlay
enabled: Menu > Radar > Collision Avoidance
• Chart application with only the AIS overlay
enabled: Menu > AIS > Collision Avoidance
Parameter Description Options
Vector
Length
The length of the vector
lines displayed depends
on the distance that
an AIS / MARPA target
travels in the time period
that you specify for this
setting.
• 0.5 min
• 1 min
• 3 min
• 6 min
• 12 min
• 30 min
• 60 min
Target
History
MARPA Targets’
previous position will
be plotted using a light
gray target icon for the
time specied.
• Off (default)
• 0.5 min
• 1 min
• 3 min
• 6 min
12.7 Tracked target list
All targets currently being tracked are shown in the
Tracked target list. MARPA and AIS targets are
shown in separate tabs.
The location of the Tracked target list is dependent
on the application and Overlays you have enabled:
• Radar application: Menu > Tracked Targets.
• Chart application with Radar and AIS overlays
enabled: Menu > Radar & AIS > Tracked Targets
• Chart application with only the Radar overlay
enabled: Menu > Radar > Tracked Targets
• Chart application with only the AIS overlay
enabled: Menu > AIS > Tracked Targets
AIS targets
By selecting an AIS target from the list you can:
• View full AIS Data
• Add the target as a Buddy (AIS targets only)
• Show the target in the Chart application
• Edit existing Buddy details:
– Remove Buddy
– Edit Buddy MMSI
– Edit Buddy Name
The List: options can be used to lter the AIS target
list to only display Buddies.
MARPA targets
By selecting MARPA target from the list you can:
• Cancel the target
130