26.2 GRIB Viewer compatibility
The GRIB viewer can be used to play compatible
third party GRIB les which adhere to the following
data/formats:
• GRIB-1 format
• WE:NS and WE:SN latitude-longitude grids
• Wind 10 metres above surface
• Temperature 2 metres above surface
• Surface temperature (Sea surface temperature)
• Pressure reduced to Main Sea Level
• Total accumulated precipitation
• Precipitation rate
• Tidal stream (Speed/direction of current)
• Combined Wind Waves and Swell, Wind Waves
and Swell wave data
26.3 Logging in
The GRIB Viewer can be logged in to the
LightHouse
™
Chart Store which will enable In-App
GRIB le downloads.
Your MFD requires an internet connection to enable
log in, refer to
Chapter 21 Wi-Fi and Mobile
applications
for details on connecting your MFD to
the internet.
1. Select the GRIB Viewer icon from the
Homescreen.
when the GRIB Viewer is opened, if you do
not have an internet connection, then you will
be requested to connect to the internet. Once
the connection is established the log in page is
displayed.
2. From the Log in page you can either: Log in or
Start Trial.
i. To Log in, enter your LightHouse
™
Chart
Store log in details and select Log in, or
ii. Select Start Trial and enter your E-Mail
address to commence a free 30 day trial.
Once you have logged in the Data Type Icons
are displayed:
GRIB Viewer 361
To Next Page
Loading...