FLIR RAYMARINE E125 - Displaying Detailed AIS Target Information; AIS Data; AIS Silent Mode

12.12 Displaying detailed AIS
target information
From the chart or radar application:
1. Select an AIS target.
The AIS target context menu is displayed.
2. Select View AIS Data.
AIS Data
The following AIS data can be displayed on the
MFD, if available:
Type
Status
Destination
Last Seen
ETA
MMSI
Call Sign IMO No.
Length
Beam Draught Heading
ROT
Position
COG
SOG CPA TCPA
Note: Available data is dependent on what
information is being transmitted from the target
and the type of AIS unit connected to your system.
12.13 AIS silent mode
AIS silent mode enables you to disable the
transmitting functions of your AIS equipment. This
is useful when you do not want to transmit your
vessel’s AIS data to other AIS receivers, but still wish
to receive data from other vessels.
Note: Not all AIS equipment supports silent mode.
For more information, refer to the documentation
that accompanied your AIS unit.
Silent mode can be switched On and Off from the AIS
menu. The location of the AIS menu is dependent
on the application and Overlays you have enabled:
• Radar application: Menu > AIS .
• Chart application with Radar and AIS overlays
enabled: Menu > Radar & AIS > AIS Options >
Silent mode:
• Chart application with only the Radar overlay
enabled: Menu > Radar > AIS Options > Silent
mode:
• Chart application with only the AIS overlay
enabled: Menu > AIS > AIS Options > Silent
mode:
138