Note: If you have 2 Radar scanners connected;
options for each Radar scanner will be shown.
2. Select Power down radar for the active Radar
scanner.
Radars connected over Wi-Fi will be placed into
Sleep mode. Sleep mode ensures the Radar’s
Wi-Fi connection remains available so the MFD
can power the Radar back on.
16.4 Multiple Radar support
The MFD supports the use of up to 2 Radar scanners
at the same time. However, only 1 of the Radars in a
system can be a Quantum Radar scanner.
For each Radar application you can select which
Radar scanner is displayed. 2 Radar scanners can
be displayed simultaneously by creating a dual
splitscreen Radar page on the Homescreen.
Selecting a Radar scanner
On systems with 2 Radar scanners, you can select
which Radar scanner is displayed in each Radar
application.
From the Radar application:
1. Select Menu.
2. Select Select Radar option.
3. Select the Radar scanner that you want to display
in the current Radar application.
The Radar selection will be remembered by the
application and will be displayed automatically
the next time that application page is displayed.
Radar application
247
To Next Page
Loading...