• If you change the radar range, in any radar
window, all synchronized chart views change scale
to match.
• If you change the scale of a synchronized chart
window, all radar windows change range to match.
Synchronizing the chart and radar range
In the 2D chart view:
1. Select Menu.
2. Select Presentation.
3. Select View & Motion
4. Select Chart Sync.
5. Select Radar.
Note: Radar range synchronization is not available
when the chart motion mode is set to Auto Range.
Aerial photo overlay
Your electronic charts may include aerial
photography.
Aerial photos cover the navigable waters up to
3 miles inside the coastline. The resolution is
dependent on the region covered by the chart card.
Enabling aerial photo overlay
From the chart application:
1. Select Menu.
2. Select Presentation.
3. Select Overlays.
4. Select Aerial.
The aerial opacity slider bar control is displayed
showing the current opacity percentage.
5. Adjust the slider bar to the required opacity, or
6. Select Off to turn the aerial overlay off.
Specifying the aerial overlay area
From the Chart application menu:
1. Select Presentation.
2. Select Overlays.
3. Select Aerial Overlay:.
A list of overlay options is displayed.
4. Select either On Land, On Land and Shallows, or
On Land and Sea.
The chart display is redrawn showing the new
overlay selection.
NOWRad weather overlay
With a suitable weather receiver connected to your
multifunction display, you can overlay NOWRad
weather information on the chart display.
The NOWRad weather overlay provides NOWRad
weather information and reports in the chart
application. You can adjust the intensity of the
overlay to achieve optimal visibility of both chart and
weather information.
Note: The NOWRad weather overlay can only be
used in North America and its coastal waters.
Enabling NOWRad weather overlay on the chart
In the 2D chart view:
1. Select Menu.
2. Select Presentation.
3. Select Overlays.
4. Select NOWRad.
The NOWRad opacity slider bar control
is displayed showing the current opacity
percentage.
5. Adjust the slider bar to the required opacity, or
6. Select Off to turn the NOWRad overlay off.
Viewing weather reports from the chart
application
In the 2D chart view:
1. Select Menu.
2. Select Weather Reports.
3. Select Report At to switch between weather
reports from Ship or Cursor location.
4. Select either Tropical Statements, Marine
Warnings, Marine Zone Forecasts, or Watchbox
Warnings.
Databoxes
Databoxes can be displayed in the application
window.
The databoxes can be switched on and off and the
data that is displayed can be customized.
Chart application
187
To Next Page
Loading...