Changing settings
25
– Emissivity.
– Reflected temperature.
– Distance.
– Relative humidity.
– Atmospheric temperature.
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Screen brightness: This setting defines the brightness of the screen. Available op-
tions are Low, Medium, High, and Auto.
◦ Viewfinder brightness: This setting defines the brightness of the viewfinder. Avail-
able options are Low, Medium, and High.
◦ HDMI: (Applicable when an HDMI cable is connected to the camera.) This setting
defines the resolution of the digital video output. The setting can be used to select
display of the image only, or display of the image and the entire overlay graphics.
• Wireless & geolocation, Wireless, or Geolocation (depending on the camera configu-
ration): This submenu includes the following settings:
◦ Wi-Fi: This setting defines Wi-Fi networks. For more information, see section 24
Configuring Wi-Fi, page 77.
◦ Bluetooth: This setting defines Bluetooth connectivity. For more information, see
section 23 Pairing Bluetooth devices, page 76.
◦ GPS: This setting is used to enable/disable the GPS.
◦ Compass: This setting is used to enable/disable the compass and to calibrate the
compass. For more information, see section 13.15 Calibrating the compass, page
42.
• Lamp & laser: This submenu includes the following settings:
◦ Enable lamp & laser: This setting is used to enable the camera lamp and the laser
pointer.
◦ Enable lamp & laser + Use lamp as flash: This setting is used to activate the flash
function. When the flash function is activated, the camera lamp will flash when an
image is saved.
◦ Disable all: This setting is used to disable the camera lamp, laser pointer, and flash
function.
• Auto power off: This setting defines how soon the camera is automatically turned off.
Available choices are Off, 5 min, and 20 min.
• User interface options: This submenu includes the following settings:
◦ Manual adjustment mode: This setting specifies the type of manual image adjust-
ment mode. Available options are Level, Max, Min and Level, Span. For more infor-
mation, see section 15.3 Adjusting the infrared image, page 49.
◦ Emissivity mode: This setting specifies how the object parameter emissivity will be
entered. Available options are Select values and Select from materials table. For
more information, see section 17.5 Changing object parameters, page 59.
◦ Screening mode: This setting is used to enable/disable screening mode. For more
information, see section 22 Screening alarm, page 75.
• Reset options: This setting defines a number or reset options:
◦ Reset default camera mode...: This will affect the color palettes and measurement
tools. Saved images will not be affected.
◦ Reset device settings to factory default...: This will affect all camera settings, in-
cluding regional settings. Saved images will not be affected. The camera will be
restarted.
◦ Reset image counter...: This will reset the numbering of the image file names. To
prevent image files being overwritten, the new counter value will be based on the
highest existing file name number in the image archive.
Note When a reset option is selected, a dialog box is displayed with more informa-
tion. You can choose to execute the reset action or to cancel.
#T559954; r. AP/42311/42335; en-US
82
To Next Page
Loading...
Need help?
General
