FLORA LJ3208P - Page 41

Flora Digital Printing System
Model LJ320P
Copyright 2011@ Shenzhen Runtianzhi Image Technology Co.,Ltd. By Victor Xu
~41~
iii. Install the print head one by one, position the print head and then tight the two fixation screws
accordingly.
Note:
 The back fixation screws must be tightened to fasten fixing tabletting, meanwhile
the front fixation screw must be tightened properly before doing Y-align.
 Take note of proper print head orientation.
Male Connector
Female Connector
Fig.5.4-3 Connectors
Filter
Fig.5.3-3 Print head Assembly
Fig.5.3-4 Print head Installation
Print Head Plate
Fixing Tabletting
A
d
j
ustment
Sprint
Y-Align adjust
screw
Front se
t
screw