FLOWBIRD CWT S5 - Daily Operation; Changing and Emptying Coin Box

Page 57CWT S5 Installation & Maintenance ManualIssue 5
Installation
5.4 Changing the settings of the terminal
Sometimes, a terminal’s application software settings need to be adapted to
meet new functional requirements. There are some alternative ways to change
software parameters, etc. See the CWT Software Configuration Handbook.
6
Daily operation
Depending on the configuration some actions must be performed one regular
base
· Changing and emptying the coin box
· Paper refill
Next to these actions, you must perform regular preventive to prevent doing
corrective maintenance.
· Maintenance describe the action to keep the terminal in good shape.
Depending on your configuration the CWT software must be updated to e.g.
implement new tariffs or implement new features.
Most of these actions can be done using the WebOffice application
· changing the CWT software and firmware
6.1 Changing and emptying the coin box
To empty the coin box, follow the 3 steps described below
Removing the coin box
1. Open the vault door with the appropriate key.
2. Turn the opening knob clockwise to the horizontal position. This closes the
collection hatch and releases a catch that holds the box in position in the
vault.
3. Pull the coin box out. A collection ticket will be printed.
Warning:
The coin box may be heavy depending on the amount of coins in it
57
58
61
79