18
Menu indicator
There are indicators at both sides of
the display window and they indicate as
follows:
Flashing in position Out of service
Flashing in position Manual
Displayed in position Unprotected
The indicators on the right-hand side show
the position in the current menu.
Menus
To display the menus you can select:
- Basic menu, which means you can browse
through four different steps
- Full menu, which comprises ten steps. Use
the Shift Menu to browse through the steps
Full Menu can be locked out using a passcode.
The main menus are shown on the next page
and the sub-menus on the subsequent pages.
FULL MENU
CALIBRATE
FULL MENU
MAN/AUTO
FULL MENU
SHIFT MENU
Changing parameter values
Change by pressing until the desired
figure is flashing.
Press to step to the desired figure.
Confirm by pressing OK.
A change can be undone by pressing the ESC
button, which returns you to the previous
menu.
To Next Page
Loading...
