Introduction and Specifications
Safety Information 1
1-3
Symbols
The safety and electrical symbols shown in Table 1-1 may appear on the
Instrument or in this manual.
Table 1-1. Symbols
Symbol Meaning Symbol Meaning
Risk of Danger. Important
information. See Manual.
Earth Terminal
Hazardous voltage. Risk of
electric shock.
Recycle
IO
Power ON / OFF
Conforms to European Union
directives.
Intertek ETL listed mark for
CSA C22.2, 61010-1 and UL
61010-1
Conforms to relevant Australian
EMC standards
AC (Alternating Current)
Conforms to relevant South
Korean EMC standards.
This product complies with the WEEE Directive (2002/96/EC) marking
requirements. The affixed label indicates that you must not discard this
electrical/electronic product in domestic household waste. Product Category: With
reference to the equipment types in the WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and Control Instrumentation" product. Do not
dispose of this product as unsorted municipal waste. Go to Fluke’s website for
recycling information.
General Safety Summary
This manual contains information and warnings that must be observed to keep
the Instrument in a safe condition and ensure safe operation. Using or servicing
the Instrument in conditions other than as specified in this manual could
compromise your safety.
To use the Instrument correctly and safely, read and follow the precautions on
the next few pages, as well as the safety instructions or warnings given
throughout this manual. In addition, follow all generally accepted safety practices
and procedures when working with and around electricity.
To Next Page
Loading...
