5-1
Chapter 5
Maintenance
Operator Maintenance
Perform the subsequent general-maintenance procedures whenever necessary.
Warning
To prevent possible electrical shock, fire, or personal injury:
• Do not service the Product unless you qualified to do so.
• Have an approved technician repair the Product.
This section contains the information necessary for basic maintenance of the
Product. The procedures in this manual are intended for Service personnel
Clean the Product
For general cleaning, first disconnect all power input and signal cables. Wipe the
Product with a soft cloth dampened with water or a non-abrasive mild cleaning
solution that does not harm plastics.
Caution
To prevent damage to the Product, do not use aromatic
hydrocarbons or chlorinated solvents for cleaning. They can
damage the materials used in the Product.
To Next Page
Loading...
