Maintenance
Running Self-Test 5
5-23
4. Push the softkey for the desired sequence, All, Base, or Head.
Select one of the three sequence options to initiate the test sequence and
show a progress-bar screen. On completion of the sequence, the progress
bar will clear showing the previous screen with the total number of both Base
and Head failures as shown below. See Figure 5-13.
hpn86.bmp
Figure 5-13. Summary of Self-Test Results
Review the Results
If one or more failures occur as a result of running the self-test, they are itemized
and shown as Base or Head failures. Either of the two categories, Base or Head,
can be expanded to show the detailed results of each failed test. Pushing either
the Show Base Results or Show Head Results softkeys expands the test results
as shown below. The Prev. Failure and Next Failure softkeys step through the
failures. Push the Previous Menu softkey to return the display to the Self-Test
Summary screen. See Figure 5-14.
hpn87.bmp
Figure 5-14. Expanded Self-Test Failure Results
To Next Page
Loading...
