Fluke 96000 Series - Frequency Reference Input;Output Specifications (96040 A and 96270 A)

96000 Series
Service Manual
1-8
Frequency Reference Input/Output Specifications (96040A and 96270A)
Frequency Reference Input Rear-panel Reference Frequency Input BNC connector
Frequency
1 MHz to 20 MHz in 1 MHz steps ±0.3 ppm, typical
Level
1 V pk nominal into 50 Ω, ±5 V pk max
Frequency Reference Output Rear-panel Reference Frequency Output BNC connector
Frequency 1 MHz or 10 MHz, user selectable
Level
1.5 V pk-pk into 50 Ω, 3 V pk-pk into 1 kΩ, TTL compatible
Accuracy
[1] [2]
±0.05 ppm
Ageing Rate and Stability
[2]
After 24-hr warmup: ≤±5x10
-10
/day, typical
Continuous operation: ≤±2x10
-8
/month typical, ≤±5x10
-8
over 1 year
[1] Includes all stability effects for the 1-year calibration interval and Tcal ±5 °C temperature range applicable to all specifications.
[2] Specifications apply only if Internal Frequency Reference operation is selected. With External Frequency Reference operation
selected, the frequency of the Frequency Reference Output is locked to the signal applied to the Frequency Reference Input.
Leveled Sine Specifications at Leveling Head Output (96040A and 96270A)
Frequency
Range 1 mHz to 4 GHz
Resolution
Standard: <100 MHz: 0.001 Hz (1 mHz), ≥100 MHz: 11 digits
Enhanced: 0.000 01 Hz (10 μHz)
Accuracy
Internal Frequency Reference: ±0.05 ppm ± 5 μHz
External Frequency Reference: Ext Freq Ref Accuracy ±5 μHz
Amplitude
50 Ω Output 75 Ω Output
Output Connector
Precision 50 Ω N-Series male Precision 75 Ω N-Series male
Range
-130 dBm to +24 dBm
(0.2 μV to 10 V pk-pk)
>125 MHz: +20 dBm
>1.4 GHz: +14 dBm
-130 dBm to +18 dBm
(0.13 μV to 6.3 V pk-pk)
>125 MHz: +14 dBm
>1.4 GHz: +8 dBm
Resolution 0.001 dB 0.001 dB
VSWR
≤100 MHz: ≤1.05
≤2 GHz: ≤1.1
2 GHz to 4 GHz: ≤1.0 + 0.05 x f (GHz)
≤100 MHz: ≤1.1
≤1 GHz: ≤1.2
≤2 GHz: ≤1.3