Fluke 96000 Series - Leveled Sine Specifications at Leveling Head Output (96040 A and 96270 A) and Microwave Output (96270 A)

1-13
Leveled Sine Specifications at Leveling Head Output (96040A and 96270A) and
Microwave Output (96270A)
Residual FM
Hz RMS in 50 Hz to 3 kHz Bandwidth
Typical
Hz RMS in 50 Hz to 15 kHz Bandwidth
Typical
125 MHz 0.004 0.03
250 MHz 0.006 0.035
500 MHz 0.01 0.055
1 GHz 0.02 0.11
2 GHz 0.04 0.22
3 GHz 0.06 0.33
RMS Jitter Typical, at +10 dBm output level, Internal Frequency Reference
Output Frequency Integration Bandwidth
Phase (m° RMS)
Time (fs RMS)
155 MHz 100 Hz to 1.5 MHz 1.0 18
622 MHz 1 kHz to 5 MHz 4.0 18
2488 MHz 5 kHz to 20 MHz 14.4 16
Signal Purity At maximum output level
Harmonics
[1]
≤1 GHz: <-60 dBc, >1 GHz: <-55 dBc
Spurious ≥3 kHz offset
96040A and 96270A: 9 MHz: <-75 dBc, 500 MHz: <-84 dBc, 1 GHz: <-78 dBc,
2 GHz: <-72 dBc, 4 GHz: <-66 dBc
96270A: 8 GHz: <-60 dBc, 16 GHz: <-54 dBc, 27 GHz: <-48 dBc
Sub-harmonics
 4 GHz, none
> 4 GHz, <-60 dBc
SSB AM Noise 10 MHz to 1.4 GHz, <0.015 % RMS, in 50 Hz to 3 kHz Bandwidth, typical
[1] Typical for harmonic content above maximum output frequency for 96270A.