1
Before You Start
Safety Information
The following symbols are used on the product and in this document:
j
NOT FOR CONNECTION TO PUBLIC TELEPHONE SYSTEMS
W
PLEASE READ MANUAL FOR SAFETY
P
COMPLIES WITH EUROPEAN UNION DIRECTIVE
X
SHOCK HAZARD
*
CLASS 1 LASER PRODUCT. DO NOT LOOK INTO LASER
w
RECYCLE LITHIUM ION BATTERIES
)
COMPLIES TO CSA C22.2 No. 950 CANADIAN STANDARDS, AND
UL 1950 (US STANDARDS)
>
UNDERWRITERS LABORATORY CERTIFICATION
/
DO NOT DISPOSE OF LITHIUM ION BATTERIES IN GARBAGE,
RECYCLE
MEETS AUSTRALIA EMC REQUIREMENTS
The OptiView
TM
Series II Integrated Network Analyzer (hereafter referred to as the
“analyzer”) complies with:
* Class 1 Laser product 21 CFR 1040.10 & 1040.11, CFR(J)
) CSA C22.2 No 950, and EN60950
WWarnings
To avoid possible electric shock or personal injury, follow
these guidelines:
• Do not use this product if it is damaged. Before using
the product, inspect the case. Look for cracked or
missing plastic. Pay particular attention to the
insulation surrounding the connectors.
To Next Page
Loading...
Need help?
General
