Fluke PM6690 - Input C (Pm6690;6 Xx); Input C (Pm6690;7 Xx); Rear Panel Inputs & Outputs

Auto Hysteresis
Time Meas. :
Freq. Meas. &
Per. Avg.:
Freq. Range:
Minimum hysteresis win
-
dow (+compensation)
70% and 30% of input
signal. Minimum hyster
-
esis window if arming on
A or B is activated.
>1 Hz (default 20 Hz)
Analog Noise
Reduction Filter: Nom. 100 kHz, RC type
Digital LP Filter: 1 Hz - 50 MHz using trig
-
ger hold-off
Trigger Indicators: LED
Max. Voltage w/o
Damage
1MW: 350 V (DC+ AC
pk
)@DC
to 440 Hz, falling to
12 V
RMS
(x1) and 120
V
RMS
(x10) @ 1 MHz
50 W: 12 V
RMS
Input C (PM6690/6xx)
Freq. Range: 100 MHz - 3.0 GHz
Prescaler Factor: 16
Operating Input
Voltage Range
100 - 300 MHz:
0.3 - 2.5 GHz:
2.5 - 2.7 GHz:
2.7 - 3.0 GHz
20 mV
rms
-12 V
rms
10 mV
rms
-12 V
rms
20 mV
rms
-12 V
rms
40 mV
rms
-12 V
rms
Amplitude
Modulation
DC - 0.1 MHz
Modulation
Frequency:
0.1 - 6 MHz
Modulation
Frequency:
Up to 94% depth
Up to 85% depth
Min. signal must exceed
min. oper. input voltage
Impedance: 50 W nom. AC-coupled
VSWR < 2.5:1
Max. Voltage w/o
Damage: 12 V
rms
, PIN diode prot.
Connector: Type N female
Input C (PM6690/7xx)
Freq. Range: 200 MHz - 8 GHz
Prescaler Factor: 256
Operating input
voltage range:
0.2 - 0.5 GHz
0.5 - 3.0 GHz
3.0 - 4.5 GHz
4.5 - 6.0 GHz
6.0 - 8.0 GHz
20 mV
rms
-7V
rms
10 mV
rms
-7V
rms
20 mV
rms
-7V
rms
40 mV
rms
-7V
rms
80 mV
rms
-7V
rms
Amplitude
Modulation
DC-0.1 MHz
Modulation
Frequency:
0.1-6 MHz
Modulation
Frequency:
Up to 94% depth
Up to 85% depth
Min. signal must exceed
min. oper. input voltage
Impedance: 50 W nom. AC-coupled
VSWR < 2.5:1
Max. Voltage w/o
Damage: 7V
rms
, PIN diode
protected
Connector: Type N female
Rear Panel Inputs & Outputs
Ref. Input: 1, 1.544, 2.048, 5, or
10 MHz;
0.1 - 5 V
rms
sinewave;
impedance >1 kW
Ref. Output: 1x10 MHz, >1 V
rms
into
50 W load
Specifications
8-6 Input and Output Specifications