PARAMETER VALUE/SETTING
Input A & B
Trigger Level AUTO
Trigger Slope POS (A), NEG (B)
Impedance 1 MW
Attenuator 1x
Coupling AC
Filter OFF
Arming
Start OFF
Start Slope POS
Start Arm Delay 200 ms
Stop OFF
Stop Slope POS
Hold-Off
Hold-Off State OFF
Hold-Off Time 200 ms
Time-Out
Time-Out State OFF
Time-Out Time 100 ms
Statistics
Statistics OFF
No. of Samples 100
No.ofBins 20
PARAMETER VALUE/SETTING
Pacing State OFF
Pacing Time 20 ms
Mathematics
Mathematics OFF
Math Constants K=1, L=0, M=1
Limits
Limit State OFF
Limit Mode ABOVE
Lower Limit 0
Upper Limit 0
Burst
Sync Delay 200 ms
Start Delay 200 ms
Meas. Time 200 ms
Freq. Limit 300 MHz
Miscellaneous
Function FREQ A
Meas. Time 200 ms
Smart Time Interval OFF
Auto Trig Low Freq 100 Hz
Timebase Reference INT
Default Settings 2-15
Using the Controls
Default Settings
See page 2-13 to see how the following prepro
-
grammed settings are recalled by a few key
-
strokes.
To Next Page
Loading...
