Using the Controls
2-4 Secondary Controls
GRAPHIC DISPLAY
320 x 97 pixels LCD with backlight for show
-
ing measurement results in numerical as well
as graphical format. The display is also the
center of the dynamic user interface, compris
-
ing menu trees, indicators and information
boxes.
SOFTKEYS
The function of these seven keys is menu de
-
pendent. Actual function is indicated on the
LCD.
Depressing a softkey is often a faster alterna
-
tive to moving the cursor to the desired posi
-
tion and then pressing OK.
MAIN INPUTS
The two identical DC
coupled channels A &
B are used for all
types of measure
-
ments, either one at a
time or both together.
RF INPUT
(Optional Input C)
A number of RF
prescalers are
available, covering
different frequency
ranges. These units
are fully automatic
and no controls af
-
fect the perfor
-
mance. The Type
N connector is fit
-
ted only if a
prescaler is
installed.
TRIGGER IN
-
DICATORS
Blinking LED in
-
dicates correct
triggering.
GATE INDI
-
CATOR
A pending mea
-
surement
causes the
LED to light up.
NUMERIC INPUT KEYS
Sometimes you may want to enter numeric values like the
constants and limits asked for when you are utilizing the
postprocessing features in MATH/LIMIT mode. These
twelve keys are to be used for this purpose.
Secondary Controls
Connectors & Indicators
To Next Page
Loading...
