Fluke PM6690 - Disassembly

Basic Controls 2-3
Using the Controls
HOLD/RUN
Toggles between
HOLD (one-shot)
mode and RUN
(continuous)
mode. Freezes
the result after
completion of a
measurement if
HOLD is active.
RESTART
Initiates one
new measure
-
ment if HOLD is
active.
EXIT/OK
Confirms menu
selections and
moves up one
level in the menu
tree.
CANCEL
Moves up one
menu level with
-
out confirming
selections made.
Exits REMOTE
mode if not
LOCAL
LOCKOUT.
ENTER
Confirms menu
selections with
-
out leaving the
menu level.
STAT/PLOT
Enters one of
three statistics
presentation
modes.
Switching be
-
tween the modes
is done by
toggling the key.
VALUE
Enters the nor
-
mal numerical
presentation
mode with one
main parameter
and a number of
auxiliary parame
-
ters.
MEAS FUNC
Menu tree for
selecting mea
-
surement func
-
tion.
You can use the
seven softkeys
below the dis
-
play for confir
-
mation.
AUTO SET
Adjusts input
trigger voltages
automatically to
the optimum lev
-
els for the cho
-
sen measure
-
ment function.
Double-click for
default settings.
CURSOR
CONTROL
The cursor
position, marked
by text inversion
on the display,
canbemovedin
four directions.