Fuel press. setup menu
● Repeat: Set the number of times that the vocal alarm for the
fuel pressure is repeated on the audio output (range:1~5,
default=1).
● Auto reset = ON/OFF: if set to ON, if a alarm condition is
activated but the measurement has returned in the green zone,
the Vigilus automatically reset the alarm indication. If set to
OFF, the user must manually reset the alarm indication, even
if the measurement has returned in the green zone (default=ON).
● Out map: you can choose to enable one of the four outputs
available on the remote module when the alarm is activated,
useful for example to turn on an alarm light on the cockpit.
Set to zero to disable this function (default=0).
● Sensor = ON/OFF: Set to ON if you have installed the fuel
pressure sensor, set to OFF if you have not installed it (the
indication will be disabled).Default=ON.
● Unit = Bar / Psi: Set the unit of measure for the fuel pressure
indication.Default=Bar.
● Filter: This parameter affect the readings and the gauges
displayed: a low value means that the readings will be more
fast and unfiltered (but subject to fluctuations), an high value
means that the readings will be more slow and stable (range:
0~999, default=100).
Instrument configuration
To Next Page
Loading...