Flybox Vigilus - Main and Settings Menus; Sensor Setup Menus (EGT, CHT, OAT, etc.)

Flybox
VIGILUS - Operating manual
16
®
Rev. 1.0
Instrument configuration
● Brightness: display brightness adjustment (1=min. brightness,
16=max. brightness). Default value=16.
● Data Logger: enter in the datalogger menu (see section 4).
● Settings: enter in the settings menu (see next chapter).
1.3.2 MAIN MENU:
1.3.3 SETTINGS MENU:
1.3.4 INSTRUMENTS MENU:
On this menu you can set all the parameters for each available
measurement. On the right window there is a preview of the
thresolds for the selected item; click the knob to enter in a item.