Need help?Do you have a question about the Flybox Vigilus and is the answer not in the manual?
Crucial steps to perform before flight for proper instrument setup and function.
Identifies and explains the instrument's display elements and control buttons.
Guide to setting up the instrument, sensors, and preferences.
Instructions on navigating and interacting with the instrument's menu system.
Overview of primary menu choices and access to system preferences.
Configuration options for various engine sensors like EGT, CHT, OAT, and CAT.
System-wide configurations including aircraft type, GPS, audio, and units.
Settings and options for the optional fuel computer function.
Displays current firmware versions for checking updates.
Procedure for upgrading the instrument's firmware via USB.
Saving and restoring instrument settings and calibrations to a USB drive.
Step-by-step guide to calibrate the fuel flow transducer for accurate measurement.
Procedure to calibrate fuel level sensors for accurate tank readings.
Procedure to identify the type of installed fuel level sensors.
Steps to activate the optional fuel computer using a key code.
General overview of the Vigilus instrument and its monitoring pages.
Detailed explanation of the primary engine data display screen.
Explanation of various engine parameters displayed on the main page.
Explanation of status indicator, flight/lap timers, and helicopter-specific data.
Graphical representation of engine temperatures (CHT, EGT, Oil).
Display of clock, flight time, and lap time.
Display of battery voltage and current.
Display of fuel levels, fuel flow, and fuel computer data.
Display of total accumulated engine hours and peak RPMs.
Explanation of how alarm conditions are indicated and lists possible alarms.
Describes alarms that occur when a sensor is not detected or faulty.
Functionality and usage of the data logging feature.
Lists all parameters that can be recorded by the datalogger.
Table showing default configuration settings for ROTAX engines.
Provides detailed hardware specifications for the Vigilus unit.
Details specifications for the remote module and supported sensor inputs.
Outlines the warranty coverage and limitations for the product.
General| Category | Automobile Electronics |
|---|---|
| Positioning | GPS/GLONASS |
| Operating Voltage | 9-36V DC |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Waterproof Rating | IP67 |
| Weight | 150g |
| Connectivity | GSM, GPRS |
| Power Supply | Vehicle Battery |
| Communication Interface | RS232, USB |
| Inputs | Digital Inputs |
| Outputs | Digital |
To Next Page