The datalogger record and shows all the data measured by the
Vigilus, so depending on the version and assuming that you
have installed all the optional probes, the available graphs are,
in the order:
- CHT
- EGT
- Oil pressure
- Oil temperature
- Gearbox temperature (for helicopter only)
- CAT: Carburetor/airbox temperature
- OAT: Outside air temperature
- Battery voltage
- Battery current
- MAP: Manifold absolute pressure
- RPM
- Rotor RPM (for helicopter only)
- Fuel pressure
- Fuel flow
- Tanks fuel from level sensors
- Remaining fuel quantity calculated by the fuel computer
- Burned fuel calculated by the fuel computer
To Next Page
Loading...