On this page all the important engine data is clearly displayed
in both graphical and numerical indications. The green, yellow
and red zones of the various gauges is completely customizable
as explained in chap.1.3.4 “Instruments menu”; when a
measurement is on a yellow or red zone the corresponding
numerical indication change color to yellow or red; when in red
zone the corresponding gauge is also blinking.
The available indications are:
● Tachometer with both graphical and numerical indication.
● MAP with both graphical and numerical indication, in inches
of mercury.
● Oil pressure with both graphical and numerical indication in
BAR or PSI, depending on what unit of measure you have
choosen in the settings.
● Oil temperature with both graphical and numerical indication
in°Celsius or °Farhenheit, depending on what unit of measure
you have choosen in the settings.
● Fuel pressure with both graphical and numerical indication
in BAR or PSI, depending on what unit of measure you h a v e
cho osen in the settings.
● Tanks fuel level: The fuel level indications here are obtained
by reading the fuel level sensors installed in your aircraft and
connected to the Vigilus. The indications are approximated, do
not solely rely on the Vigilus to determine the fuel available in
the tanks but always refer to primary instrument installed in your
aircraft.
Main engine data page
To Next Page
Loading...