Oil press. setup menu
● Auto reset = ON/OFF: if set to ON, if a alarm condition is
activated but the measurement has returned in the safe zone,
the Vigilus automatically reset the alarm indication. If set to
OFF, the user must manually reset the alarm indication, even
if the measurement has returned in the safe zone (default=ON).
● Out map: you can choose to enable one of the four outputs
available on the remote module when the alarm is activated,
useful for example to turn on an alarm light on the cockpit.
Set to zero to disable this function (default=0).
● Type: set the type of oil pressure sensor installed:
NO: not installed (disable the indication).
RES: ROTAX Resistive (engine before 2008/05).
420: ROTAX 956413 or Flybox® 602000 (default).
JAB: standard JABIRU sensor.
● Unit = Bar / Psi: Set the unit of measure for the oil pressure
indication (default=bar).
● Filter: This parameter affect the readings and the gauges
displayed: a low value means that the readings will be more
fast and unfiltered (but subject to fluctuations), an high value
means that the readings will be more slow and stable (range:
0~999, default=100).
Instrument configuration
To Next Page
Loading...