Rev. 1.0
Global settings menu
CAUTION: Even if the Vigilus presets all the parameters for
the selected engine, it’s up to the installer to check the
compliance of all the settings and thresholds to the engine
specifications.
By choosing “Generic” you must manually select the engine
type (aspired or injection) and the number of cylinder. After
selecting the “Generic” setup, you must manually set also all
the other Vigilus parameters and thresholds according to your
engine specifications.
NOTE: Since the engine selections reset all the parameters,
you should set this as the first thing and never change it
anymore, unless you want to reset all the parameters to the
default value.
● Cyl. Position: Choose the cylinders position, to have a correct
indication in the graphical temperatures page.
Front of the
engine
Instrument configuration
To Next Page
Loading...