Rev. 1.0
Important notices & warnings
WARNING: Responsibility for installation lies entirely with the
installer. Responsibility for operations lies entirely with the
operator. Responsibility for any calibration, settings or any
other customization lies with the person performing these
operations.
WARNING: Do not solely rely on this instrument to determine
the primary engine informations. Always compare the
informations provided with other primary instruments to
recognize eventual malfunctions.
IMPORTANT: If you do not agree with the notices above
do not install this instrument in your aircraft, but return
the product for a refund.
Microel s.r.l. reserves the right to change or improve its
products. Information in this document is subject to changes
without notice.
WARNING: For safety reasons, the Vigilus operational
procedures must be learned on the ground.
WARNING: It’s up to the installer to check the correctness
of the settins for its engine, even using one of the Vigilus
preset, because engine manufacturers may change
parameters without notice. The engine preset of the Vigilus
are a help but needs to be checked by the installer.
To Next Page
Loading...